I worked in a fab/ machine shop in my youth. The guy had two South Bend turret lathes. I was always fascinated by them. As a kid, they were just plain fun to operate. They could spit out parts like crazy. When he died, I know a boatload of instrument machining talent went with him. I saved some of the pieces he made. I'm going to look for them now.
My smallish (13") lathe has an 1800 rpm 1.5 hp motor. The spindle goes down to 34 rpm: that's around 50+ hp at the spindle.... even at 300 rpm, it's around 9+ hp. There is LOTS of torque available. And these sorts of operations are done on stuff like 1045 medium carbon steel. In other words, a day ending in y in the shop. Nothing out of the way. People who don't use machine tools don't understand the power involved, which is why newbies and nitwits get hurt. The first thing you learn in the shop is that the machine don't care; it will hurt you. The forces involved in machining are much bigger than the nonmachinist comprehends.
Can we all just be honest as a species and acknowledge that ALL of this is the product of WHITE MEN seeing a need and using their superior IQs and talents to address the need through innovation, etc? Not saying that others might night have contributed, but at the heart of the process was one or more WHITE MALES.
I could do that by hand but we’d all be dead before I finished.
ReplyDeleteBeen in lots of machine shops. Lots of fascinating things being made. Friend has a shop he can damn near make a carrier drive shaft.
DeleteDamn, Irish!
ReplyDeleteAll that and it was pre-AI, no shortcuts... A Masterpeice
Looks like stuff is getting real again, and fakery abounds.
Let's keep the party going and bear witness to small deeds of resistance and grit.
Known Associate
I worked in a fab/ machine shop in my youth. The guy had two South Bend turret lathes. I was always fascinated by them. As a kid, they were just plain fun to operate. They could spit out parts like crazy. When he died, I know a boatload of instrument machining talent went with him. I saved some of the pieces he made. I'm going to look for them now.
ReplyDeleteWhite man's magic.
ReplyDelete-lg
I am surprised that you can do tht much work on the piece without breaking it.
ReplyDeletetakes a lot of torque to both turn down a diameter AND double thread it at the same time.
Must be pretty good stock.
My smallish (13") lathe has an 1800 rpm 1.5 hp motor. The spindle goes down to 34 rpm: that's around 50+ hp at the spindle.... even at 300 rpm, it's around 9+ hp. There is LOTS of torque available. And these sorts of operations are done on stuff like 1045 medium carbon steel. In other words, a day ending in y in the shop. Nothing out of the way. People who don't use machine tools don't understand the power involved, which is why newbies and nitwits get hurt. The first thing you learn in the shop is that the machine don't care; it will hurt you. The forces involved in machining are much bigger than the nonmachinist comprehends.
DeleteCan we all just be honest as a species and acknowledge that ALL of this is the product of WHITE MEN seeing a need and using their superior IQs and talents to address the need through innovation, etc? Not saying that others might night have contributed, but at the heart of the process was one or more WHITE MALES.
ReplyDeleteThere’s something about fine machine work. A skill that is sadly disappearing.
ReplyDeleteMy luck, I'd snap the head off torqueing it in some hard to reach position.
ReplyDelete